17
9.3.
Slide, in turn, the compression
nut, then the olive, over the hot
and cold inlet pipework. If
necessary, sparingly, smear
‘liquid jointing’ on the pipe end
and the outside of the olive.
9.4.
Insert the hot and cold inlet
pipework into the opening of the
1
/
2
" BSP inlet connector nipple
then slide the olive and
compression nut into place.
9.5.
Finally, carefully tighten,
clockwise, the compression nut.
If necessary use a cloth to
protect the plated surfaces.
10.
Fit the ‘O’ seal to the tapered end of the
outlet nipple and screw it into the shower
control outlet using a 12 mm A/F
hexagon wrench (not supplied). This will
leave the flat face for connection to the
shower hose.
11.
This completes the installation of the
Mira CombiForce 415
for
“Rising or
Falling Inlet Supplies”
.
'O' Seal
Compression
Nut
Olive
Summary of Contents for Combiforce 415
Page 51: ...51 Appendix Notes ...
