MIROxi
User Manual cod. 980265
Rev 1.6
Page 13 of 32
To transfer data through a Bluetooth connection
To transfer data through acoustic coupling
WARNING
IF no key is pressed for 1 minute the instrument will ‘beep’, and if no key is pressed for a further 10 seconds
the device will automatically switch off. If
MIROxi
is powered by a USB connection to a PC, this auto power-
off function is disabled and the device is switched off using
.
The instrument can be switched off at any time by pressing and holding the
key for two seconds.
2.2 Battery Level
The symbol
shown in the second screen when the unit is turned on indicates that the battery is charged. The following symbol
indicates Low Battery:
If the battery is discharged the following message appears:
BATTERY DISCHARGED
2.3 Information
Switch on
MIROxi
by pressing
. The display will show:
•
MIROxi
– x.y (device name and software revision number)
•
Power means (USB or battery symbol)
•
Current date and time
•
icon (Access to the Service Menu)
•
SpO2/BPM icon
Press OK to go to the second display. Press ESC to go directly to the main screen.
The second display will show:
•
Subjects in memory (no. of patients)
•
SpO2 (no. of oximetry tests made)
•
Available memory (% value).
If there is no information or test data in memory, i.e. the memory is empty, then all data is shown with 0 (null).
2.4 Initial Set-up
Switch on
MIROxi
by pressing and holding
and wait for the second screen. Press to access the service menu.
The following screen “Service Menu” contains the following menu:
•
Select Language (English is the default)
•
Delete MEMORY
•
Change Date/Time
•
Date Format
•
Units Format
•
Phone Setup
•
Bluetooth Setup
•
Firmware Info
•
Oximetry alarms
•
SpO2 sampling time
•
Energy saving
Select the option required using or and the symbol on the left of the screen; press OK to access options; select
the required setup using the or arrow, then press OK to return to the Service Menu.
Select Language
