Minuteman Continuous Power Series, Owner'S Manual

Page: 15 / 58

1 3
Minuteman Continuous Power Series UPS
W A R N I N G W A R N I N G W A R N I N G W A R N I N G W A R N I N G
The UPS weighs more than 125 pounds (56.7 kg). It is manda-
tory that the necessary precautions be taken to lift, move,
set, and position the UPS.
N O N O
N O N O
N O T E T E
T E T E
T E
Current limiting and mechanical disconnect devices, sup-
plied by the customer, between the UPS and the input source
must be installed prior to operating a hardwired UPS. It is rec-
ommended that current limiting and mechanical disconnect
devices also be installed between the UPS and the load.
Follow the National Electric Code where applicable during
installation.
W A R N I N G W A R N I N G
W A R N I N G W A R N I N G
W A R N I N G
To reduce the risk of fire or electric shock, install in a tem-
perature and humidity controlled indoor area free of con-
ductive contaminants.
W A R N I N G W A R N I N G W A R N I N G W A R N I N G W A R N I N G
Do the following BEFORE CONNECTING ANY WIRING:
•
TURN OFF the UPS by pushing the ON/OFF and OFF but-
tons at the same time.
•
TURN OFF all input power (AC and DC)
•
TURN OFF the critical load (Any transformers or motors in
front of the load are considered part of the load
•
VERIFY WITH A METER that the power is removed
Conduit Hole
Terminal Blocks
(behind rear panel plates)
Rack-Mount
Figure 3-2. Rear Panel of the Rack-Mount Models
WARNING!
NOTE
WARNING!
WARNING!