Minolta PageWorks 25 User Manual Download Page 223

Page: 223 / 317

7-28

Printer Messages

ble

ooti

Cha

r 7

*1: The current emulation (PCL or PS) is displayed. If the JOB LANGUAGE setting is

AUTO, this item will not appear.

*2: The current emulation (PCL5, PCL6 or PS) is displayed.
*3: If an error occurs, a warning message appears on the second line. See the following

section for details.

*4: The user name (up to 8 characters) that is specified in the printer driver properties

dialog. For details, see Chapter 4.

*5: This item displays the total number of sets that have just been copied/number of

sets to be copied.

Warning Messages (on the second line)

The following messages are displayed during the READY or
OFFLINE modes.

Panel Display

Description & Action

(tray) EMPTY

The specified tray is out of paper.

Load more paper.

(tray) LOW

The specified tray is almost out of paper.

Prepare more paper to replenish the tray.

TONER LOW

The toner is low but printing is possible.

Prepare a new imaging cartridge for
replacement.

I/C ALMOST USED

The imaging cartridge is almost ready to
be replaced.

Prepare a new imaging cartridge.

MAINTENANCE REQ2

[TRANSFER ROLLER]

The count of the image transfer roller is
over the pre-determined value.
“

MAINTENANCE REQ2

” and

“

TRANSFER ROLLER

” are displayed

alternately.

Replace the image transfer roller. (see
page 6-11.)
After replacing the image transfer roller,
be sure to reset the counter through the
TRANSFER LIFE item of the
MAINTENANCE MENU.

25pw.book Page 28 Thursday, March 16, 2000 10:29 AM

Summary of Contents for PageWorks 25






























































































































































































































































































































Search results

Summary of Contents for PageWorks 25

Reviews:

Related manuals for PageWorks 25

Brands by name

Popular brands

Minolta PageWorks 25, User Manual

Search results

Summary of Contents for PageWorks 25

Reviews:

Related manuals for PageWorks 25

Brands by name

Popular brands