Minolta PageWorks 18, User Manual

Page: 50 / 219

2-20
Options
Setting-up
Chapter 2
10
Replace the external side cover using the two screws.
11
Print a Configuration Page (page 2-14) and check to make sure
that the “Total Memory” item correctly shows the increase in
memory capacity. If it does not, repeat the above steps making
sure that the SIMM is installed correctly.
Note
• To release the SIMM from the socket, push out on the taps on each side
of the socket.
• After installation of the SIMM, reset the Printer Memory Setting to
reflect the new memory capacity (see page 4-60).