Minolta PageWorks 18 User Manual Download Page 116

Page: 116 / 219

4-30

Using the Printer Driver Under Windows 95/98/NT 4.0

Printer Driver

Chapter 4

Jogging

Jogging Tray

was inadvertently checked during the installation of

the printer driver, it will appear in the printer driver’s

Paper

tab. This

printer does not support

jogging tray

compatibility. If necessary,

remove the

jogging tray

item from the printer driver’s interface by

specifying it as uninstalled in the

Device Options

tab.

Default

Click the

Default

button to reset the functions of the tab to their

original values.

Note

• The Paper Size and Paper Source settings of other applications may

override the settings made in the printer driver.

Summary of Contents for PageWorks 18




























































































































































































































Search results

Summary of Contents for PageWorks 18

Reviews:

Related manuals for PageWorks 18

Brands by name

Popular brands

Minolta PageWorks 18, User Manual

Search results

Summary of Contents for PageWorks 18

Reviews:

Related manuals for PageWorks 18

Brands by name

Popular brands