Minolta PageWorks 18 User Manual Download Page 27

Page: 27 / 219

Control Panel

1-7

Introduction

Chapter 1

Off

Blinking

Controller-memory error.

Turn off the printer and contact Minolta
Technical Support.

Off

Blinking

Engine error (fusing unit).

Turn off the printer and contact Minolta
Technical Support immediately.

Blinking

Engine error (laser).

Turn the printer off and on again. If the
problem persists, contact Minolta
Technical Support.

Blinking

Off

Blinking

Engine error (polygon scanner).

Turn the printer off and on again. If the
problem persists, contact Minolta
Technical Support.

Blinking

Engine error (fan motor).

Turn the printer off and on again. If the
problem persists, contact Minolta
Technical Support.

Blinking

Engine error (HSYNC).

Turn off the printer and contact Minolta
Technical Support.

Indicator Lights

Printer Status and Recommended Action

Ready

(green)

Paper

(amber)

Error

(red)

Summary of Contents for PageWorks 18




























































































































































































































Search results

Summary of Contents for PageWorks 18

Reviews:

Related manuals for PageWorks 18

Brands by name

Popular brands

Minolta PageWorks 18, User Manual

Search results

Summary of Contents for PageWorks 18

Reviews:

Related manuals for PageWorks 18

Brands by name

Popular brands