Minolta Minoltafax 1300, User Manual, Page: 86 / 114

C
ONNECTING THE
F
AX TO THE
C
OMPUTER
Minoltafax 1300 79
Command Parameter Function Initial
position
&L 0 MODEM mode &L0
1 Scanner mode
2 Scanner mode fix
&W none Memorise the setting
+FCLASS? none Indicate current service class of DCE
+FCLASS=n none Setting service class of DCE
+FRH=n none Receiving command of HDLC mode
+FRM=n none Receiving command of normal mode
+FRS=n none No signal detection (n x 10ms)
+FTH=n none Transmission command of HDLC mode
+FTM=n none Transmission command of normal mode
+FTS=n none n x 10ms interval
A/ none Repeat previous command ERROR
B 0 ITU-T mode selection OK
1 Bell mode selection ERROR
DS none Dial the number automatically which is
memorised in the Modem ERROR
I 0-2 Indicate product code, check sum and
etc. of the Modem OK
L 0-3 Monitor speaker volume control OK
Q 0 Return response code OK
1,2 Control response code ERROR
Sr? none Read-out S register OK
Sr=n none Write n in the S register OK
W 0,2 Control connection OK
X 0-4 Control response code OK
Y 0 No disconnect the line with brake signal OK
1 Disconnect the line with brake signal ERROR
&D 0-3 Operation control for ER OK
&V none Indicate the setting status of the Modem OK