E
NTERING
D
ATA
32
Minoltafax 1300
OFF = PSTN mode
NO. = line code
FLASH = Flash key
If you selected "OFF" or "FLASH"
proceed with step 14.
PBX MODE
OFF
12
If you selected "NO.", press [SET] and
enter the line code (up to 4 digits).
LINE CODE
z
13
Press [SET]. A beep confirms the entry.
3: FEATURE SW. ?
14
Press [STOP] to end the procedure. The
machine switches to standby mode.
23 Mar. ’97 12:00
F
If your machine is already programmed with a name and a telephone
number you want to change now, delete the old information first, digit
by digit using one-touch key 8 / [DELETE].
Make sure to set the correct dialling method. To change it follow the
procedure given in section "Changing the Setting of the User Switches".
3.4.1
Positioning the Header
Software switch No. 20 allows to change the position of the header. You
can place the header inside or outside of the original. (cf. "Program-
ming User Software Switches“) Note that approximately 1 cm of the
received message may be lost, if the header is placed inside the printing
area. The factory-setting is outside of the original.