background image

12

Composite Shaft

Johnson Outdoors Marine Electronics, Inc. warrants to the original purchaser that the composite shaft of 
the purchaser’s Minn Kota

®

 trolling motor is free from defects in materials and workmanship appearing 

within the original purchaser’s lifetime. Johnson Outdoors Marine Electronics, Inc. will provide a new shaft, 
free of charge, to replace any composite shaft found to be defective more than two (2) years after the 
date of purchase. Providing such a new shaft shall be the sole and exclusive liability of Johnson Outdoors 
Marine Electronics, Inc. and the sole and exclusive remedy of the purchaser for breach of this warranty; 
and purchaser shall be responsible for installing, or for the cost of labor to install, any new composite shaft 
provided by Johnson Outdoors Marine Electronics, Inc.

Entire Product

Johnson Outdoors Marine Electronics, Inc. warrants to the original purchaser that the purchaser’s entire Minn 
Kota

®

 trolling motor is free from defects in materials and workmanship appearing within two (2) years after the 

date of purchase. Johnson Outdoors Marine Electronics, Inc. will, at its option, either repair or replace, free 
of charge, any parts, including any composite shaft, found to be defective during the term of this warranty. 
Such repair or replacement shall be the sole and exclusive liability of Johnson Outdoors Marine Electronics, 
Inc. and the sole and exclusive remedy of the purchaser for breach of this warranty.

Terms Applicable to Both Warranties

These limited warranties do not apply to motors used commercially or in salt water, nor do they cover normal 
wear and tear, blemishes that do not affect the operation of the motor, or damage caused by accidents, abuse, 
alteration, modifi cation, misuse or improper care or maintenance. DAMAGE TO MOTORS CAUSED BY 
THE USE OF REPLACEMENT PROPELLERS OR OTHER REPLACEMENT PARTS NOT MEETING THE 
DESIGN SPECIFICATIONS OF THE ORIGINAL PROPELLER AND PARTS WILL NOT BE COVERED BY 
THIS LIMITED WARRANTY. The cost of normal maintenance or replacement parts which are not defective 
are the responsibility of the purchaser. To obtain warranty service in the U.S., the motor or part believed to 
be defective, and proof of original purchase (including the date of purchase), must be presented to a Minn 
Kota

®

 Authorized Service Center or to Minn Kota

®

’s factory service center in Mankato, MN. Any charges 

incurred for service calls, transportation or shipping/freight to/from the Minn Kota

®

 Authorized Service Center 

or factory, labor to haul out, remove, re-install or re-rig products removed for warranty service, or any other 
similar items are the sole and exclusive responsibility of the purchaser. Motors purchased outside of the U.S. 
(or parts of such motors) must be returned prepaid with proof of purchase (including the date of purchase 
and serial number) to any Authorized Minn Kota

®

 Service Center in the country of purchase. Warranty service 

can be arranged by contacting a Minn Kota

®

 Authorized Service Center listed on the enclosed sheet, or by 

contacting the factory at 1-800- 227-6433, 1-507-345-4623 or fax 1-800-527-4464. Note: Do not return your 
Minn Kota

®

 motor or parts to your retailer. Your retailer is not authorized to repair or replace them.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THESE LIMITED WARRANTIES. IN NO EVENT 
SHALL ANY IMPLIED WARRANTIES (EXCEPT ON THE COMPOSITE SHAFT), INCLUDING ANY 
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EXTEND 
BEYOND TWO YEARS FROM THE DATE OF PURCHASE. IN NO EVENT SHALL JOHNSON OUTDOORS 
MARINE ELECTRONICS, INC. BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of 
incidental or consequential damages, so the above limitations and/or exclusions may not apply to you. This 
warranty gives you specifi c legal rights and you may also have other legal rights which vary from state to 
state.  

LIMITED WARRANTY

13

F

rançais

It is the intention of Johnson Outdoors Inc. to be a responsible corporate citizen, operating in compliance with 
known and applicable environmental regulations, and a good neighbor in the communities where we make 
or sell our products.

WEEE Directive:

EU Directive 2002/96/EC “Waste of Electrical and Electronic Equipment Directive (WEEE)” impacts most 
distributors, sellers, and manufacturers of consumer electronics in the European Union. The WEEE Directive 
requires the producer of consumer electronics to take responsibility for the management of waste from their 
products to achieve environmentally responsible disposal during the product life cycle.

WEEE compliance may not be required in your location for electrical & electronic equipment (EEE), nor may it 
be required for EEE designed and intended as fi xed or temporary installation in transportation vehicles such 
as automobiles, aircraft, and boats. In some European Union member states, these vehicles are considered 
outside of the scope of the Directive, and EEE for those applications can be considered excluded from the 
WEEE Directive requirement.

This symbol (WEEE wheelie bin) on product indicates the product must not be disposed 
of with other household refuse. It must be disposed of and collected for recycling and 
recovery of waste EEE. Johnson Outdoors Inc. will mark all EEE products in accordance 
with the WEEE Directive. It is our goal to comply in the collection, treatment, recovery, 
and environmentally sound disposal of those products; however, these requirement do 
vary within European Union member states. For more information about where you should 
dispose of your waste equipment for recycling and recovery and/or your European Union 
member state requirements, please contact your dealer or distributor from which your 
product was purchased.

Disposal:

Minn Kota motors are not subject to the disposal regulations EAG-VO (electric devices directive) that 
implements the WEEE directive. Nevertheless never dispose of your Minn Kota motor in a garbage bin but at 
the proper place of collection of your local town council. 

Never dispose of battery in a garbage bin. Comply with the disposal directions of the manufacturer or his 
representative and dispose of them at the proper place of collection of your local town council.

ENVIRONMENTAL COMPLIANCE STATEMENT

Summary of Contents for ENDURA C2















Reviews: