Mini?Cam Proteus Lite, Original Instruction Manual

Page: 15 / 116

15
Version C Mini-Cam Proteus Lite
Warnings, Safety Measures and Care
Please read the safety measures closely and observe them. They preserve your
own safety, the safety of co-workers as well as the prevention of damage to the
Proteus
™
Lite inspection system and its components.
CAUTION!
The operator of the Proteus ™ Lite inspection system must be trained
by either Mini-Cam or one of its authorised representatives before
using the system.
CAUTION!
Despite all of the safety functions built into the system, the operator is
not exonerated in any way from his/her duty of care. Thus the user
alone is responsible for any damage caused as a result of misuse.
CAUTION!
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
DANGER!
Risk of deadly injuries from electrical current!
The mains plug and or IEC connector of the PSU is the supply isolation
device and must be easily accessible.
DANGER!
Risk of deadly injuries from electrical current!
• The power supply for the crawler can generate a high voltage
which can be considered hazardous, however this supply cannot
be switched on unless all parts of the system are connected.
Consequently this supply is not accessible, and as soon as any
connection is exposed or disconnected the power supply will
automatically shut off.
• This hazardous voltage may be exposed if the control unit, cable
reel or crawler is opened while the system is operational. Therefore
the modules of the system should only be opened by a
Mini-Cam Service Centre .