Minebea Intec Signum 3 Ex, Operating Manual

Page: 78 / 136

78 Signum 3 Ex
Product Data Memory
Product Data Memory
Purpose
The product data memory stores
initialization data and user data
(product and tare values)�
Characteristics
– The product data memory has 100
memory cells for product or tare values�
– For example, you can store 80 sets of
application data and 20 tare values�
– Each memory cell is uniquely identified
by a number up to three digits�
– The product data memory can be used
with the following applications:
Application level 1
–
weigh.
–
count.
–
neutr.m
–
anim.wg
–
perc.wg
Application level 2
–
check.wg
–
class.
– Data records can be created, overwritten
and individually deleted
– Data remains stored when the scale is
switched off
Functions
Saving product data (in this example, in
the Counting application):
§
Initialize the application�
§
Enter a memory number and press and
hold the
R
key (min� 2 seconds)�
Saving preset tare values:
§
Allocate preset tare memory�
§
Enter a memory number and press and
hold the
t
key (min� 2 seconds)�
Activation of saved product or tare
values:
§
Enter a memory number and press the
R
key�
Displaying information for a specific
product or tare value:
§
Enter a memory number and press
the
I
key�
§
Use the
k
key to select between
wRef
(average piece weight) and
nRef
(quantity)�
§
Use the
)
key to scroll the displayed
value to the right�
§
Activate the displayed memory by
pressing the
R
key�
§
Delete the displayed memory by
pressing and holding the
c
key
(min� 2 seconds)�
§
Exit the mode by pressing the
c
key�
Displaying information for all product
or tare memories:
§
Press the
R
key to display the first
memory number�
§
Press the
k
key to scroll through in
lexical order (e�g� 1, 3, 333, 4, ���)�
§
Press the
R
key to activate the
selected memory number�
§
Display the saved product values using
the
I
key�
§
Press and hold the
c
key (at least
for 2 seconds) to delete the selected
memory number�
§
Exit the mode by pressing the
c
key�
Deleting a specific memory number:
§
Enter a memory number and press and
hold the
c
key�
Example:
Using the Counting application with
a stored average piece weight�
Settings (different from the factory
settings):
Setup: Application parameters:
Application: Counting
(Count.)
Saving the average piece weight:
§
Initialize the application�
§
Determine the average piece weight
using one of the methods described
above�
§
Enter the memory cell number using
the keypad, and press and hold the
R
key (min� 2 Seconds)�
Loading the average piece weight or
reference sample quantity:
§
Enter the memory cell number and
press the
I
key�
§
Use the
k
key to select between
wRef
(average piece weight) and
nRef
(quantity)�
§
Use the
)
key to scroll the displayed
value to the right�
§
Activate the displayed memory by
pressing the
R
key�
§
Delete the displayed memory by
pressing and holding the
c
key
(min� 2 seconds)�
§
Exit the mode by pressing the
c
key�
Overwriting data in memory cell:
§
To save a new average piece weight in
a memory cell already in use, enter the
desired memory cell number using the
keypad and press and hold the
R
key
(min� 2 seconds)� The previous average
piece weight is overwritten�
Deleting an average piece weight:
§
Enter the memory cell number of the
average piece weight to be overwritten
and press the
I
key�
§
Delete the displayed value by pressing
and holding the
c
key (min�
2 seconds)�
Data Interface