Minebea Intec Signum 3 Ex, Operating Manual

Page: 57 / 136

57 Signum 3 Ex
Averaging (Animal Weighing) Application
V
Weighing in Percent Application
L
Weighing in Percent
Application
L
With the Weighing in Percent
application, you can use your weighing
platform to obtain weight readouts in
percent which are in proportion to a
reference weight�
L
is displayed as the weight unit�
Characteristics
– Save the current weight value as
reference weight “pRef”
– Enter the reference weight “Wxx%” for
100% using the keypad
– Enter the reference percentage “pRef”
using the keypad
– Display result as loss (difference) or
residue
– Display up to 3 decimal places�
Configured in Setup under:
appl1
:
Perc.wg
:
3.10.
– Activate Info mode with the
I
key
– Toggle the display between percent and
weight using the
w
key�
– Automatic taring of container weight�
Configured in Setup under:
appl
:
a.tare
:
3.7.
– Automatic initialization when the
scale is switched on� The application is
initialized with the most recently saved
data� Configured in Setup under:
appl
:
a.start
:
3.8.
– Exit application, delete parameters:
The value of the reference weight in
the memory remains active until it is
deleted, overwritten or the application
is changed using the
c
key� The value
also remains saved after the scale is
turned off�
– You can assign different functions to
the
c
key for deleting applications�
When you clear applications, you can
delete either the data stored for all
applications or just selected data stored
for the active application� Configured in
Setup under:
Appl
:
sel.cf
:
3.24.
(Sel� CF function key
c
in
applications)
– Tare function:
1) If you store a tare (weight value)
by pressing the
)
key, you can later
enter a tare value manually� The tare
value you enter is added to the stored
tare value�
Setting: menu code 3�25�1 (factory
setting)
2) A tare value entered manually
overwrites a stored tare value (weight
value)�
If you enter a tare value manually,
a tare value (weight value) stored later
overwrites the manually entered value�
Setting: menu code 3�25�2
Configured in Setup under:
Appl
:
tare. f
:
3.25.
– Restore factory default settings�
Configured in Setup under:
appl
:
def.app
:
9.1.
To determine the weight of a sample
relative to a reference weight, you need
to define the reference percentage
value� There are three ways to enter this
value in the application program:
– Calculation:
– Place the reference quantity (defined
by the reference percentage) on the
connected weighing platform and press
the
O
key to initialize the application�
– Place any amount of the sample
material on the connected weighing
platform, enter the reference percentage
through the keypad, and press the
r
key to initialize the application�
How the reference weight is calculated
depends on the application setting that
defines “Accuracy for saving weights”�
The value is either rounded off in
accordance with the display resolution,
or saved with 10-fold or 100-fold
resolution, or with the maximum
internal resolution of the weighing
platform�
– By entering the reference weight for
100% using the keypad and pressing
the
O
key to initialize the application�
The initialization data remains valid
until deleted by pressing the
c
key
or until overwritten by a new value�
They remain saved after the Signum
®
is
switched off�
Preparation
§ Turn scale on: Press the e key
§ While all segments are lit, press the
) key
§ Select Setup: Press the k key
repeatedly until
appl
is displayed
§ Confirm
appl
: Press the ) key
§ Select the Weighing in Percent
application:
Press the k key repeatedly and
confirm with the ) key
Weighing in Percent Application Parameters
3� 6� Minimum load for initialization
3�6�1* 1 digit
3�6�2 2 digits
3�6�3 5 digits
3�6�4 10 digits
3�6�5 20 digits
3�6�6 50 digits
3�6�7 100 digits
3�6�8 200 digits
3�6�9 500 digits
3�6�10 1000 digits
3� 9� Reference value calculation
resolution
3�9�1* Display accuracy
3�9�2 Display accuracy
+ 1 decimal place
3�9�3 Display accuracy
+ 2 decimal places
3�9�4 Internal resolution
3�10� Decimal places in displayed result
3�10�1* None
3�10�2 1 decimal place
3�10�3 2 decimal places
3�10�4 3 decimal places
3�11 Parameter for saving weight values
3�11�1* With stability
3�11�2 With increased stability
3�15� Display of calculated values
3�15�1* Residue
3�15�2 Loss
* = Factory setting
§
Save the settings with the
)
key and
exit Setup: Press the
(
key several
times�