Minebea Intec Signum 3 Ex, Operating Manual

Page: 76 / 136

76 Signum 3 Ex
Configuring Printouts
Configuring
Printouts
Purpose
You can configure individual printout
formats for each application� Using the
total data record for Totalizing and Net
total formulation applications, you can
define which parameters are printed
using the
c
key�
In the “Print parameters” Setup menu,
single, component and total data
records can be configured, which
contain the available print items for the
respective applications� This should be
carried out after setting the applications
since some data in the printout is
application-dependent�
Characteristics
– Quantity and extent of printout lists:
6 lists each with a max� length of 30
print items
- Single printout Printer 1
- Component printout Printer 1
- Total data printout Printer 1
- Single printout Printer 2
- Component printout Printer 2
- Total data printout Printer 2
– Single, component and total data
records can be configured separately
– Print single printout:
p
key
Auto printout of application when
Setup menu is activated:
– Animal weighing (averaging)
– Checkweighing
– Classification
– Print component printout:
Totalizing/Net-total formulation
with the
O
key (Setup: Application
3: Totalizing: Printout: Component
printout)
– Print total data printout:
For selected application Totalizing/
Net-total formulation with
c
key
– When switching to another application
in Setup, only the application-
dependent printout lists are deleted�
The other printout lists remain saved�
– Print items can be deleted individually:
Press and hold the ( key
– Print items “Form Feed” for record
footer:
Move to the next label start for printer
type: YDP04IS, setting “Label, manual
form feed”
– ISO/GLP/GMP-compliant printout:
The Setup menu configuration under
“ISO/GMP-compliant printout” is also
active for configured printouts�
Preparation
§ Turn scale on: Press the e key
§ While all segments are lit, press the
) key
§ Select Setup menu: Press the k key
repeatedly until
setup
is displayed
§ Select “Config� printout:” Press the
) key
§ Press the k key repeatedly until
prtpot
is displayed
§ Press the ) key
prtprot
(see page 35 for a detailed menu list)
7
7�4 Header and ID header input
7�5 Interface quantity
7�6 Standard interface
7�7 Component interface
7�8 Result interface
7�13 ISO/GMP
7�14 Date without time
7�15 Automatic printout after
stability
7�16 Flex print
7�17 Decimal separator
9
9�1 Factory settings
– The rows of the printout list can be
called up and activated individually�
Example: see under Configuration,
menu item 7�6
– The print selection set as active appears
with the left selection bar on the
display, e�g� gross, tare, net�
§
Extend printout, press the
)
key, the
selection bar now appears on the right
of the display�
§
Select print items using the
k
key
§
Apply the desired print items by
pressing the
)
key
§
Press the
(
key to change the print
selection set as active�
The selection bar appears on the left�
The required print item is set as active
and appears in the printout�
�
– Print items can be deleted individually
from the active printout selection:
Press and hold the
(
key
§
Save the settings with the
)
key and
exit Setup: Press the
(
key several
times�
Additional Functions
Printing the “Selection” and “List”
Settings
–
LIST
: Output of the current printout
list
SELECT
: Print currently selectable items
§
When the select bar is on
LIST
or
SELECT
:
Press the
p
key
> Printout (example)
Indiv.Prt
List
====================
Net (N)
Gross (G#)
Tare
Tare (T2/PT2)
Piece count
====================
etc�
Configuring Printouts