Minebea Intec Compact scale Puro Basic EF-P1, Operating Instructions Manual

Page: 30 / 59

— 4800 4,800
— 9600 9,600*
— 19200 19,200
— 38400 38,400
— 57600 57,600
— 115200 115,200
— PARITY Parity
— 7 EVEN 7 data bits, even parity
— 7 Odd 7 data bits, odd parity
— 7 NONE 7 data bits, no parity
— 8 NONE 8 data bits, no parity*
— 7 MARK 7 data bits, mark parity
— 7 SPACE 7 data bits, space parity
— STOP Stop bit
— 1 1*
— 2 2
— HAND.SH Handshake
— NONE No handshake*
— XON.XOF No function
— RESET Factory settings
— NO not reset*
— YES activated
— END Exit menu level
— CAL Initiates a two-point calibration (zero and max.
load)
— LIN Initiates a linearization (zero, half weighing
range and max. load)
— GEO The adjustment of the calibration based on the
current location is carried out using the
geographic adjustment factor (GEO). (Settings
from 0 … 31, default value = 12)
— END Exit menu level
— TYPE Display model name
— SER.NUM Display serial number
— S.APPLI Application menu
— OFF Unlock*
— ON Locked
— S.UNIT Unit menu
5.3.2.9 [CAL.ADJ] menu selection
The scale can be calibrated and adjusted in this menu (see Chapter 5.4 ).
CAL.ADJ
5.3.2.10 [INFO] menu selection
INFO
5.3.2.11 [SECURE] menu selection
The safety setting (lock) for menu access can be defined via this menu in order to prevent
unauthorized interventions.
Factory settings are marked with "*"
SECURE
5 Operating Compact scale Puro® - Basic
Minebea Intec EN-27