The value of the calibration weight is shown in the display; all digits ([001500.0])
flash (in this example 1,500 kg)
8. To change the value of the calibration weight, press the
Unit
(No) key and change
the value.
The first digit flashes: [_015.000 kg].
9. Press the
Off
(Yes) key in order to confirm the value and to go to the next digit.
The second digit flashes: [0_15.000 kg].
10. Press the
Unit
key to increase the value, or the
Mode
F
key to decrease the value.
11. Repeat until all digits are correct.
The value of the calibration weight is displayed using flashing digits in the
display: [00100.0] (in this example 100.0 kg)
12. If the value of the calibration weight is correct, place the specified weight on the load
plate.
13. Press the
Off
(Yes) key to adopt the second calibration point.
Compact scale Puro® - Basic
5 Operating
EN-30
Minebea Intec
