Minebea Intec Compact scale Puro Basic EF-P1, Operating Instructions Manual

Page: 27 / 59

— OFF deactivated*
— ON 1st stable weight is tared
— ON-ACC No effect in this device
— BEEP.SI Signal (in the Checking application)
— OFF deactivated*
— ACCEPT No effect in this device
— UNDER No effect in this device
— OVER No effect in this device
— UNDOVR No effect in this device
— BEEP.KE Key tone
— OFF deactivated
— ON activated*
— TOT.SET Totalizing setting
— OFF deactivated
— AUTO Automatic totalizing
— MAN Manual totalizing*
— LIGHT.T Duration of the background lighting (D.LIGHT =
AUTO)
— 3 SEC Switching off of the background lighting after 3
seconds with no activity
— 5 SEC Switching off of the background lighting after 5
seconds with no activity*
— 8 SEC Switching off of the background lighting after 8
seconds with no activity
— D.LIGHT Background lighting of the display
— OFF deactivated
— ON activated
— AUTO Switches on when a key is pressed or the
displayed weight changes*
— COM.EQU Communication module
— OFF deactivated*
— BLUE.TH Bluetooth activated (if the Bluetooth module is
installed)
— WIFI WiFi activated (if the WiFi module is installed)
— ETHER.N Ethernet activated (if the Ethernet module is
installed)
— RESET Factory settings
— NO not reset*
— YES activated
— END Exit menu level
— STABLE Print criteria
— OFF Values are printed immediately
— ON Values are only printed if they are stable*
— A.PRINT Automatic printout
— OFF deactivated*
— ON.STAB printing on stability
5.3.2.5 [PRINT] menu selection
Scale parameters can be printed in this menu.
Factory settings are marked with "*"
PRINT
Compact scale Puro® - Basic 5 Operating
EN-24 Minebea Intec