Minebea Intec CAW3P, Operating Instructions Manual

Page: 29 / 188

Multi-interval Mode The illustration shows an example of the input menu opened for multi-interval
mode range configuration. This example shows the parameters for a scale in
“Verifiable” configuration, with 2 weighing ranges and a maximum capacity of
6.000 kg.
– Range 1: 0…3.000 kg with e1 = 0.001 kg
– Range 2: 3.002…6.000 kg with e2 = 0.002 kg
t
Enter the verification scale interval for Range 1 in the “
E
“ input field.
The minimum capacity for a class l scale must be set to 0.02 kg.
t
Use the “
o
“ soft key to go to the next menu level.
y
The active range configuration is marked with “
o
.“
t
Use the “
o
“ soft key to go back to the “
Verifiable
“ menu.
Selecting Units
t
Use the “
q
“ and “
O
“ soft key to open the “
Available units
“
menu item.
This menu lets you enable or disable the weight units available under “Weight
unit 1,“ “Weight unit 2“ and “Weight unit 3.“
t
Select the respective unit using the “
Q
“ or “
q
“ soft key and confirm using the
“
l
“ soft key.
In most cases, you will not need to change defined values.
Available weight units are marked by a *.
The weight unit used for configuration of weighing ranges cannot be blocked.
t
Use the “
o
“ soft key to go back to the “
Internal
“ menu.
t
Use the “
q
“ and “
O
“ soft key to open the “
Calibration/
adjustment
“ menu.
t
Use the “
q
“ and “
O
“ soft key to open the “
Calibration/
adjustment unit
“ menu item to define the weight unit for
calibration and adjustment. In most cases, you will not need to change defined
values .
y
All units are displayed in the menu that are activated in “
Available
units
.“ The current setting is marked by a “
o
.“
Operating Instructions Combics Complete Scales 29
Configuring Weighing Platforms