Minebea Intec CAW3P, Operating Instructions Manual

Page: 27 / 188

Analog/Digital Converter (ADC) Configuration
Condition The weighing platform must already be connected.
Open the Menu Access Switch The menu access switch is located on the back of the indicator right next to the
weighing platform connection.
t
Remove the cap.
t
Slide the switch to the left (= “open“ position).
Activating the Service Mode
t
See “Service Mode“ on page 17.
Configuration
t
Select weighing platform “
WP 1
.“
t
If the “
Internal
“ setting is not already activated (marked by “
o
“), select
the setting using the “
Q
“ or “
q
“ soft key and confirm with “
O
.“
y
The message “
Function active
“ appears briefly. The “WP 1 internal“
menu will then open.
t
Open the
ADC
Conf i guration menu.
t
Select the desired configuration data record using the “
Q
“ or “
q
“ soft key:
“
Standard
“ or “
Verif
i
able
“ (verifiable configuration).
The default setting depends on the data record.
t
Open the menu for configuring A/D converter parameters. In this example, the
menu for ADC configuration of a weighing platform for use in legal metrology
is opened.
If “
Standard
“ was selected previously, then the “
Accuracy tass
“
is not displayed.
t
Open the first menu item.
For a standard configuration, the “
Ranges
“ menu item, for a verifiable
configuration, the “
Accuracy class
“ menu item.
When the “Verifiable” configuration is active, always select the “
Accuracy
class
“ menu item first.
t
Set accuracy class
l
/
m
. The “
o
“ symbol should mark the setting, if required
confirm using the “
l
“ soft key.
t
Press the “
o
“ soft key to exit the menu item.
t
Open the “
Ranges
“ menu item.
Operating Instructions Combics Complete Scales 27
Configuring Weighing Platforms