Introduction
Warnings, Cautions and Notes
iv
0070-10-0685
NetGuard Service Manual
Warnings
WARNING: Only qualified and trained Mindray DS Patient Monitoring
Service personnel or those trained by Mindray DS Patient
Monitoring Service should attempt to service this equipment.
Service is defined as any activity requiring the cover to be
removed for internal adjustments, parts replacements,
repairs or software upgrades of any kind to ensure
compatibility.
WARNING: To ensure compatibility with the operating system and
applications software, use only Mindray DS USA, Inc.
supplied and/or approved components to repair any part of
the NetGuard
™
System. Use of unauthorized software,
devices, accessories, or cables other than those approved by
Mindray DS USA, Inc. may render the application unsuitable
for medical patient monitoring. It may also result in
increased electromagnetic emissions or decreased Immunity
of the system.
WARNING: To adequately display the software application, it is
important to maintain a minimum screen resolution of
1024x768 with 96 dpi.
WARNING: Some of the equipment on the NetGuard Network must
utilize the hospital emergency power system. Failure to do
so will result in loss of monitoring during extended periods
of power failure. The back-up power time period for the
NetGuard Network is limited.
WARNING: Changes to the NetGuard server configuration and client PC
software should not be performed without the guidance of
a qualified service representative.
WARNING: Do not use the NetGuard device in an explosive atmosphere
or in the presence of flammable anesthetics or gases.
Cautions
CAUTION:
For proper operation use with UL agency approved ethernet
cables.
CAUTION:
For proper operation, do not use the equipment with a
frayed or damaged power cord or ethernet cable.
CAUTION:
Do not use a damaged or broken unit or accessory.
CAUTION:
For proper operation never place fluids on top of the server.
In case of accidental spillage, remove power, wipe clean
immediately and have the system serviced to ensure no
hazard exists.
CAUTION:
The server and client PC for this device must only be setup
by qualified service personnel.
CAUTION:
Do not block the client PC’s speakers. Set the volume levels
to ensure that alarms can always be heard.
CAUTION:
Speaker volume should be set high enough to hear an
alarm above ambient noises.
Summary of Contents for NetGuard
Page 1: ... Datascope NetGuard Service Manual 0070 01 0685 01_revB indd 1 3 10 10 5 23 19 PM ...
Page 2: ... Datascope NetGuard Service Manual ...
Page 5: ...Table of Contents ii 0070 10 0685 NetGuard Service Manual ...
Page 9: ...vi 0070 10 0685 NetGuard Service Manual This page intentionally left blank ...