Mindray BeneHeart D1, Operator'S Manual

Page: 41 / 106

6-5
NOTE

Once the equipment enters Synchronized Cardioversion mode, the alarms resume.

During synchronized cardioversion, it is important to continue to hold the shock button until the shock is
delivered. The equipment shocks with the next detected R-wave.

If no R-wave is detected within 9s, a prompt message "'No R-Wave" is displayed.
6.5.2 Delivering Additional Synchronized Shocks
If additional synchronized shocks are indicated, perform the following steps:
1. Make sure the equipment is still in Sync mode, as indicated by the presence of the Sync message in the
defibrillation information area.
2. Repeat Steps 4 to 9 as described above.
If [ Sync after Shock ] is set to [ Yes ], the equipment remains in the sync mode after a shock is delivered; if set to [ No ], the
equipment exits the sync mode and enters the asynchronous defibrillation mode after a shock.
6.5.3 Disabling the Sync Function
To switch off the Sync function, press the [ Exit Sync ] soft key to enter the Manual Defib mode.