3-1
3
Basic Operations and Settings
3.1
Installation
WARNING
The equipment shall be installed by personnel authorized by the manufacturer.
The software copyright of the equipment is solely owned by the manufacturer. No organization or
individual shall resort to juggling, copying, or exchanging it or to any other infringement on it in any form
or by any means without due permission.
Devices connected to the equipment must meet the requirements of the applicable IEC standards (e.g. IEC
60950 safety standards for information technology equipment and IEC 60601-1 safety standards for
medical electrical equipment). The system configuration must meet the requirements of the IEC 60601-1-1
medical electrical systems standard. Any personnel who connect devices to the equipment’s signal
input/output port is responsible for providing evidence that the safety certification of the devices has
been performed in accordance to the IEC 60601-1-1. If you have any question, please contact the
manufacturer.
If it is not evident from the equipment specifications whether a particular combination is hazardous, for
example, due to summation of leakage currents, consult the manufacturers or else an expert in the field, to
ensure the necessary safety of all devices concerned will not be impaired by the proposed combination.
NOTE
To ensure that the equipment is ready for any urgent use, keep it with battery installed and pads
preconnected.
3.1.1
Unpacking and Checking
Before unpacking, examine the packing case carefully for signs of damage. If any damage is detected, contact the carrier
or the manufacturer. If the packing case is intact, open the package and remove the equipment and accessories carefully.
Check all materials against the packing list and check for any mechanical damage. If you have any question, please
contact us.
WARNING
Package material may contaminate the environment. Properly dispose of the package material according
to applicable waste control regulations and keep it out of children’s reach.
The equipment might be contaminated during storage and transport. Before use, please verify whether
the packages are intact, especially the packages of single use accessories. In case of any damage, do not
apply it to patients.
Summary of Contents for BeneHeart D1
