Minarik MMBOSS Series, User Manual

Page: 32 / 56

24
Operation
Starting and Stopping Methods
Warning
Decelerating to minimum speed, regenerative braking, or
coasting to a stop is recommended for frequent starts and
stops. Do not use any of these methods for emergency
stopping. They may not stop a drive that is malfunctioning.
Removing AC line power (both L1 and L2) is the only
acceptable method for emergency stopping.
For this reason, Minarik strongly recommends installing an
emergency stop switch on the BUS+ input (see
Connections).
NOTE
: After a one-second time delay, all drives
automatically run to set speed when power is applied and the
ENABLE input is jumpered.
Frequent decelerating to minimum speed or regenerative braking
produces high torque. This may cause damage to motors,
especially gearmotors that are not properly sized for the
application.
250-0288.qxd 6/9/00 1:05 PM Page 24