Minarik MMBOSS Series, User Manual

Page: 18 / 56

Quick-connect terminal block
The quick-connect terminal block, found on the 1Q plug in card,
is composed of a header block and terminal plug (Figure 3). To
use the quick-connect terminal block:
1. Carefully pull terminal plug from header block.
2. With a small flat-head screwdriver, turn terminal plug screw
counterclockwise to open wire clamp.
3. Insert stripped wire into the large opening in front of the plug.
4. Turn the terminal plug screw clockwise to clamp the wire.
5. Repeat steps 2–4 for each terminal until all connections are
made.
6. Insert plug into header until securely fastened.
10
Installation
Figure 3. Quick-Connect Terminal Plug
250-0288.qxd 6/9/00 1:05 PM Page 10