MIMAKI ML Tiger-1800B MKII, Operation Manual

Page: 81 / 174

Chapter 6 Basic usage
6-27
2
2
2
6
Auto maintenance setting
By using Auto maintenance, cleaning is automatically performed during printing or idling, and the nozzle condition is
maintained or improved.
Recommended settings
The following is the recommended setting for ensuring ejection stability.
•
Auto-cleaning during printing can be set according to the distance, but it is recommended to set according to the time
because the timing differs depending on the drawing mode.
Auto maintenance setting screen display
Select [Auto maintenance] > [Cleaning (Print)] or [Cleaning (Idle)] in the MAINTENANCE MENU to display the setting
screen.
The cycle starts when Auto maintenance is set.
• If cleaning is performed at any time, the cycle will be restarted.
Ink type
Printing Idling
Mode
Interval Print time
[min]
Mode Flushing Times Time [min]
MLRc500 Normal 30 Normal 3 30
MLSb510 Normal 30 Normal 3 30
MLSb520 Normal 30 Normal 3 30