MIMAKI ML Tiger-1800B MKII Operation Manual Download Page 34

Page: 34 / 174

2-8

Chapter 2 Outline explanation

Procedure

Squeegee movement

Mode

Operation

Referen

AUT.

If the belt is not moving, the squeegee blade does not touch the belt because the washing tank is at a
low position.

If you select to start belt feeding, the tank is lifted by the air cylinder, so the squeegee blade and the belt
are in contact.

AUT.

After the tank rises, the squeegee blade moves horizontally in the opposite direction of the belt. After
the movement, the belt feed starts.

After cleaning the belt, the belt stops, the pneumatic piston lowers the tank position, and the tank
leaves the belt.

AUT.

The horizontally moving air cylinder sets the squeegee blade of the second tank to the initial position.

End of procedure

• The figure is an outline, and only the operation of the washing tank at the time of cleaning the belt is

shown in the figure.

Summary of Contents for ML Tiger-1800B MKII















































































































































































Search results

Summary of Contents for ML Tiger-1800B MKII

Reviews:

Brands by name

Popular brands

MIMAKI ML Tiger-1800B MKII, Operation Manual

Search results

Summary of Contents for ML Tiger-1800B MKII

Reviews:

Brands by name

Popular brands