MIMAKI ML Tiger-1800B MKII Operation Manual Download Page 139

Page: 139 / 174

Chapter 7 Operation, Adjustment, and Maintenance

7-19



Replacement procedure

(1)

Gently pull up the waste hose from the waste tank.

• There is a possibility that the waste fluid splashes if you raise the tank vigorously.

(2)

Put the ink that remains in the waste hose into the waste tank.

• Do not put the waste hose completely out from the mouth of the waste tank.

(3)

Insert the waste fluid hose into the spare tank. Discard the ink in the waste tank.

• When moving the hose between the tanks, hold the outlet of waste hose with a cloth or something.
• Comply with the laws and regulations of each local government or region for disposal of the waste.

Waste tank

Spare tank

Disposal

Summary of Contents for ML Tiger-1800B MKII















































































































































































Search results

Summary of Contents for ML Tiger-1800B MKII

Reviews:

Brands by name

Popular brands

MIMAKI ML Tiger-1800B MKII, Operation Manual

Search results

Summary of Contents for ML Tiger-1800B MKII

Reviews:

Brands by name

Popular brands