MIMAKI ML Tiger-1800B MKII, Operation Manual

Page: 53 / 174

5-3
Chapter 5 Push Button Panel
1
2
2
2
5
Push button panel (P01)
The push button panel (P01) is located on the left side of the PC screen.
Below is a description of the buttons of the push button panel (P01).
1
CONTROL VOLTAGE
Power supply lamp: When this lamp is lit, power is supplied to this unit and the
main switch is turned on.
2
EMERGENCY
Emergency switch: Press this button to immediately stop the machine and turn off
the auxiliary circuit.
3
RESET EMERGENCY
Emergency reset switch: When this button is lit, the cycle is stopped. After
eliminating the cause of the emergency stop, release the emergency switch and
press the reset button to reset the emergency stop signal.
4
EXCLUSION SAFETY DOOR
Safety door switch: Used to release the limit switch which opens the door of the
printer.
By turning off the switch, you can check the operation of the printer with the door
open.
Used only for applying the adhesive.
Operation is possible only for skilled technicians. Keep the key by department
administrator.