MIMAKI CFL-605RT, Operation Manual

Page: 34 / 170

1-20
Local Status / Remote Status
Press on the operation panel to toggle between the local and remote status.
Local Status and Displays
The local status permits movement of the heads, setup of the unit functions, and receiving data from the PC.
All keys on the operation panel are enabled in local status.
Remote Status and Displays
The remote status permits cutting or drawing of the received data.
The display shows the cutting (drawing) conditions and the received data volume. The number of displayed
data decreases as cutting (drawing) proceeds.
POWER ON, POWER OFF,
, and are enabled on the operation screen panel.
The following three screens appear in the remote status.
Recipro Cutter, Grid Roller Selected
This remote screen appears when Unit:B,
TOOL: Rec.Cutter 1and 2 /

Cutter / Roller1 to 3
is selected for TOOL SELECT in the local menu.
S (start offset) and E (end offset) do not appear
when the grid roller is selected.
*1) Display the current number / total number during running the number of cutting.
*2) When select Tangential cutter, roller, “ROT (Rotation)” is not displayed.
PRS : Cutting pressure
SPD :
Cutting speed
RING : Rounding radius
S :
Start offset
E : End offset
H: Up angle
ROT : Rotation *2
< REMOT E > * * * * KB
B : REC . CUT T ER 1 * * / * *
< REMOT E > * * * * KB
SPD : 3 0 c m / s PRS : 1 5 0 0 g
< REMOT E > * * * * KB
R I NG : 0 . 3mm
< REMOT E > * * * * KB
S : 0 . 5 0mm E : 0 . 5 0mm * *
< REMOT E > * * * * KB
H
:
3 0 ° ROT : 3 0 0 0 r pm
*1