manualshive.com logo in svg

MIMAKI CFL-605RT, Operation Manual

The MIMAKI CFL-605RT user manual guarantees seamless operation. Packed with essential Safety Precautions, this comprehensive manual ensures user-friendly instructions to maximize safety and productivity. Download this manual for free at manualshive.com, your go-to source for convenient and reliable user manual downloads. Camouflaging our impressive website, acquire your manual swiftly for the MIMAKI CFL-605RT.

Share
Download
background image

4-18

Detect operation

1

Scan  in  the  Y  direction  (plus  direction)  to  detect
the line.

• The buzzer sounds when the line is detected. If the line is not

detected, the buzzer does not sound.

2

Scan in the Y direction (minus direction) to detect 
the line.

3

Scan in the X direction (plus direction) to detect 
the line.

4

Scan in the X direction (minus direction) to detect 
the line.

5

Follow the Steps 1 to 4, and confirm if the buzzer 
sounds 4 times.

• When  the  detection  behavior  completes  successfully,  the

buzzer sounds 4 times.

• If  the  buzzer  does  not  sound,  contact  our  sales  office  after

checking the registration mark condition. 

Minus

direction

Plus

direction

Scan in the Y direction

Scan in the Y direction

Minus

direction

Plus

direction

Summary of Contents for CFL-605RT











































































































































































Reviews:

No comments

Related manuals for CFL-605RT

Brands by name

Popular brands

Load more brands