4
5
FUNCTIONAL DESCRIPTION
1.
On/off volume control knob
2.
Tuning knob (Mono/Stereo button)
3.
Display window
4.
Battery compartment
5.
Lock/release latch
6.
CLOCK button
7.
MODE button
8.
MEM button
9.
PRESET button
10. Punch EQ button
11
12
13
16
15
17
14
12
4
5
1
3
2
10
8
9
6
3
7
11. Stereo AUX jack
12. Detachable bag hooks
13. External antenna connection
14. Line cord
15. 12 volt DC output jack
16. Soft grip
17. Protective handle
18. Detachable bag (not shown)
Double Insulated Radios:
Radios with Two Prong Plugs
Radios marked “Double Insulated” do not
require grounding. They have a special
double insulation system which satisfies
OSHA requirements and complies with the
applicable standards of Underwriters Labo-
ratories, Inc., the Canadian Standard As-
sociation and the National Electrical Code.
Double Insulated radios may be used in
either of the 120 volt outlets shown in Fig-
ures A and B.
Fig. A
Fig. B
Double insulated tools can use either a two
or three wire extension cord. As the dis-
tance from the supply outlet increases, you
must use a heavier gauge extension cord.
Using extension cords with inadequately
sized wire causes a serious drop in volt-
age, resulting in loss of power and pos-
sible tool damage. Refer to the table shown
to determine the required minimum wire size.
The smaller the gauge number of the wire,
the greater the capacity of the cord. For
example, a 14 gauge cord can carry a
higher current than a 16 gauge cord. When
using more than one extension cord to make
up the total length, be sure each cord con-
tains at least the minimum wire size re-
quired. If you are using one extension cord
for more than one tool, add the nameplate
amperes and use the sum to determine the
required minimum wire size.
Guidelines for Using Extension Cords
•
If you are using an extension cord out-
doors, be sure it is marked with the
suffix “W-A” (“W” in Canada) to indi-
cate that it is acceptable for outdoor use.
•
Be sure your extension cord is prop-
erly wired and in good electrical
condition. Always replace a damaged
extension cord or have it repaired by a
qualified person before using it.
•
Protect your extension cords from
sharp objects, excessive heat and
damp or wet areas.
•
Unplug all cords during lightning storms
or when unused for long periods of time.
GROUNDING
EXTENSION CORDS
Recommended Minimum Wire
Gauge for Extension Cords*
Extension Cord Length
* Based on limiting the line voltage drop to
five volts at 150% of the rated amperes.
Nameplate
A m p e r e s
0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 16.0
16.1 - 20.0
25'
18
18
18
18
16
14
12
75'
18
18
16
14
12
10
100'
18
16
14
12
10
150'
16
14
12
12
50'
18
18
18
16
14
12
10
Volts
AC
120
Cat. No.
49-24-0280
Specifications
m A
500
