4
5
ASSEMBLY
CAUTION
Be sure to follow the assembly in-
structions for the appropriate
chest/cabinet. Do not use power tools to as-
semble chest/cabinet. Tighten bolts with hand
wrenches.
NOTE:
Begin product assembly close to the fi nal
intended location of your chest/cabinet. This product
is heavy and may be diffi cult to move after assembly.
Tools Required
ġ
ġ
ġ
ġ
Phillips
screwdriver
Safety
goggles
10 mm
Wrench
13 mm
Wrench
Hardware Included
NOTE:
Items not shown to actual size.
Hardware
Item
Description
Quantity
AA
Screw M4 x 10L
16
BB
Screw M6 x 15L
8
CC
Bolt M6 x 15L
4
DD
Washer
16
EE
Bolt M8 x 15L
16
Item
Description
Quantity
Side handle
1
Swivel caster with
brake
2
Rigid caster
2
Bracket
2
Bumper
4
Cord Storage
Bracket
2
NOTE:
Begin product assembly close to the fi nal
intended location of your chest/cabinet. This product
is heavy and may be diffi cult to move after assembly.
Attaching the Side Handle
Attach the side handle to the rolling cabinet using
four bolts (CC). The side handle can be attached to
either side of the rolling cabinet.
NOTE:
The holes in the cabinet are tapped and do
not require nuts.
Installing the Casters
CAUTION
Two people may be required to
complete installation.
CAUTION
Do not overtighten the screws.
1. Ensure all cabinet drawers are securely locked into
place using the key lock on the rolling cabinet.
2. Lay the rolling cabinet on its back. Use the packag-
ing material to protect the fi nish.
GROUNDING
WARNING
Improperly connecting the ground-
ing wire can result in the risk of
electric shock. Check with a qualifi ed electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the chest/cabinet. Never remove the
grounding prong from the plug. Do not use the
chest/cabinet if the cord or plug is damaged. If
damaged, have it repaired before use. If the plug
will not fi t the outlet, have a proper outlet installed
by a qualifi ed electrician.
Chests/Cabinets with Three Prong Plugs
Chests/cabinets marked “Grounding Required” have
a power strip with a three wire cord and three prong
grounding plug. The plug must be connected to a
properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user,
Fig. A
reducing the risk of electric shock.
The grounding prong in the plug is
connected through the green wire
inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically “live” terminal.
Your power strip must be plugged into an appropriate
outlet, properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in Figure A.
3. Mount the two swivel casters with brake to the
rolling cabinet using four bolts (EE) and washers
(DD) per caster. The swivel casters with brake
should be installed on the end of the cabinet with
the side handle.
4. Mount the two rigid casters to the opposite end
of the rolling cabinet using four bolts (EE) and
washers (DD) per caster.
5. Tighten all bolts securely with a wrench.
6. Return the rolling cabinet to its upright position.
Installing the Chest onto the Cabinet
CAUTION
Two people may be required to
complete installation.
1. Place the top chest on top of the rolling cabinet.
NOTE:
The holes in the cabinet are tapped and
do not require nuts.
2. Attach the two brackets to the back of the product
to secure the top chest to the rolling cabinet. Place
the brackets over the holes and secure with four
screws (AA) per bracket.
3. Tighten all screws securely with a Phillips screw-
driver.
