Selecting the COM interface
At
“Connect using:”
use the
“Direct link using COM1”
,
“Direct link using COM2”
, etc. to select the COMx interface
with which the colorimeter data-transfer cable is connected.
Then click on
“OK”
.
The display now shows:
Setting the interface parameters
Now you must make the following settings:
Bits per second (baud rate):
19200
Data
bits:
8
Parity: None
Stop
bits:
1
Flow control:
Xon / Xoff
The settings for the parameters
“Flow control”
and
“Baud rate”
are now the same as those entered in the Spectroquant®
Multy.
Chapter 5.4 | Page 5 of 19
Fig. 8
