Go to
“Options > Communication parameters”
and set the
baud rate
to
19200
and
ComPort
to
"AUTO"
(or the number of
the connected
COM port
, e.g. Com-Port 1). Then click on
“OK”
.
After this go to the menu item
“File > Open..”.
for
HexLoad
to
load the software update
(*.hex file)
. Now switch the colori-
meter on. When a connection to
HexLoad
has been established,
the
display
of the
Spectroquant®
Multy Colorimeters
remains
blank
.
HexLoad
should now look similar to the example below, although
the figures actually shown may vary:
It is essential that:
•
under
“File”
in the top lefthand corner the message
“No data loaded”
has changed and been replaced by
values similar to those shown above; and
•
under
“Target”
in the top righthand corner values
(in blue type) are now shown.
Chapter 5.5 | Page 3 of 5
Fig. 2
Fig. 3
