Miller 500 BW, Operator'S Manual, Page: 75 / 96

71
Transport Lock In Storage Position On
Boom Stabilizer Arm
Fold the boom using the following procedure:
NOTE: For EFT booms, level both boom wings before proceeding.
1. Raise the boom to the full lift height.
2. Fold the boom inward until the boom is over the top of the transport rest.
3. Place the tractor in park and/or set the brakes and stop the engine.
4. Remove the transport lock from the storage position on the boom stabilizer arm and put in
place on the hydraulic lift cylinder.
5. Restart the tractor and lower the boom on to the boom transport rest.
EFT Boom
After the sprayer booms have been unfolded and lowered to the correct height, tilt the boom wings
using the following procedure:
1. Flip the wing tilt switch on the control box to the tilt position.
2. Using the tractor hydraulic controls tilt the individual wings up or down to the desired position.
a. The tractor control for the single hose control will tilt the left wing.
b. The tractor control for the dual hose control will tilt the right wing.
Wing Tilt Switch