Miller 500 BW, Operator'S Manual, Page: 60 / 96

56
6. When transfer is complete, use the hand rinse gun to rinse the chemical inductor tank. Allow
the rinse water to go through the chemical inductor into the product tank.
NOTE:
•
If the hand rinse gun is supplied with water from the product pump, the water will come
from the product tank and will be contaminated with diluted chemical.
•
If the hand rinse gun is supplied with water from the optional 12 volt electric pump, the
water will come from the rinse tank.
7. Always turn the valve under the chemical inductor tank OFF before turning the “Chemical Fill”
valve OFF.
8. Replace the chemical inductor tank lid.
9. Fully OPEN the “Agitation” valve and allow the product pump to run long enough to thoroughly
mix the product tanks contents.
Chemical Inductor
Tank
Chemical Inductor
Tank Cover
Chemical Fill
Control Valve
Chemical Inductor
Venturi
Agitation Control
Valve
Valve At Bottom
Of Inductor Tank
Hand Rinse Gun