31
Table 4-4-3 Description of the buttons
Parameters
Function Introduction
IR Balance Mode
There is an option to turn On/Off the IR LED.
IR Balance Mode would avoid the problem of overexposure or darkness, and
the IR LED will change according to the actual illumination.
White Balance
To restore white objects and remove color distortion cause by the light of
the environment
Auto White Balance:
This option will automatically enable the White Balance
function;
Manual White Balance:
Set Red Gain Level and Blue Gain Level manually;
Incandescent Lamp:
Select this option when light is similar with incandescent
lamp;
Warm Light Lamp:
Select this option when light is similar with warm light
lamp;
Natural Light
: Select this option when there is no other light but natural light;
Fluorescent Lamp:
Select this option when light is similar with Fluorescent
Lamp.
Schedule mode:
Select this option that you can customize the schedule to
enable/disable above modes
Reduce Motion Blur
This function is only for H.264 series. Better image for moving objects, it may
lead worse quality for still objects
Digital Anti-fog Mode
This function is only for H.265 series. Better image effect in foggy weather,
refers to Figure 4-4-9
Digital Image Stabilisation
This function is only for H.265 series. Decrease the blur and shakiness of the
image.
Exposure Mode
Auto Mode, Manual Mode and Schedule Mode are available.
Auto Mode:
The camera will adjust the brightness according to the light
environment automatically;
Manual Mode:
The camera will adjust the brightness according to the value
you set, you can set the exposure time from 1~1/100000
s, the higher the value
is, the brighter the image is;
Schedule Mode:
You can customize the schedule to enable/disable Auto Mode
and Manual Mode.
Single Mode
Set single mode for BLC/WDR/HLC.
Day/Night Mode
Support BLC/WDR/HLC on Day Enhancement Mode/Night Enhancement Mode
separately.
Schedule Mode
Set schedule mode for BLC/WDR/HLC.
BLC Region
Off, Customize, and Centre are available (in single mode, only enable when
WDR is disable)
Off:
Calculate the full range of view and offer appropriate light compensation
Customize:
This option enables you to customize inclusive or exclusive region
manually
Centre:
This option will automatically add an inclusive region in the middle of
the window and give the necessary light compensation
