Milesight Technology MS-C2942-B User Manual Download Page 87

Page: 87 / 89

4.7 Maintenance

4.7.1 System Maintenance

The software can be upgraded by the following steps:
Step1: Browse and select the upgrading file;
Step2: Click the “upgrade” button after it prompts upload file successfully. After the system

reboots successfully, the update is done.

Note:

Do not disconnect the power of the device during the update. The device will be restarted to

complete the upgrading.

Figure 4-7-1 Maintenance

Table 4-7-1 Description of the buttons

Parameters

Function Introduction

System Upgrade

Hardware Version:

The hardware version of the camera;

Software Version:

The software version of the camera;

Kernel Version:

The kernel version;

Firmware File:

Select the firmware used to upgrade.

Summary of Contents for MS-C2942-B


























































































Search results

Summary of Contents for MS-C2942-B

Reviews:

Related manuals for MS-C2942-B

Brands by name

Popular brands

Milesight Technology MS-C2942-B, User Manual

Search results

Summary of Contents for MS-C2942-B

Reviews:

Related manuals for MS-C2942-B

Brands by name

Popular brands