51
Alarm to SIP Phone
Support to call the SIP phone after enable the SIP function.
HTTP Notification
Support to pop up the alarm news to specified HTTP URL.
White LED
When the alarm triggered, White LED will turn on to warning the detected
objects (Only for Mini (PoE) PTZ Bullet).
PTZ Motion
When the motion alarm triggered, PTZ Motion allows the camera move the lens
to the motion triggered position and zoom in.
Call Preset/
Call Patrol/Call Pattern
(only for External
Input)
When the motion alarm triggered, the specified preset/patrol/pattern can be
called.
NOTE:
1)
The
HTTP notification
function is just one way for camera to send messages to VMS Software.
And it's the VMS that defines what the messages mean and decides what to do after receiving
this kind of messages. So, we can use the
HTTP Notification
function of our cameras only if the
VMS supports this kind of message format.
Here the Digifort will be taken as an example to introduce the
HTTP Notification
function.
The following are the detail steps of setting for HTTP Notification in Digifort VMS and our
cameras.
Step1: Enable Alarm; set Motion Region and Detection Schedule;
Step2: Confirm the HTTP Notification as Alarm Action, and fill the fields. Then save the
alarm setting;
HTTP User Name: admin (the user name of your camera)
HTTP Password: ms1234 (the password of your camera)
HTTP Notification URL:
http://IP:8601/Interface/Cameras/MotionDetection/Notify?Camera=CameraName
IP
refers to the PC's IP where the Digifort installed.
8601
is the port for Motion signal in Digifort.
CameraName
is the camera name you set in Digifort VMS, like the picture shown below.
