Technical Data
MC130x Users Manual Rev. 2.1
9.4.1 Code of the clock synthesizer
Each frequency pair corresponds to two hexadecimal codes that are
used to program the synthesizer. These are also obtained on a read
camera profile (
) command.
table 20
step
in hex
pixel clock
in MHz
sensor clock
of mode 0
in MHz
sensor clock
of mode 1
in MHz
sensor clock
of mode 2
in MHz
sensor clock
of mode 3
in MHz
0 61dd8d 406d01 407182 416a85 416705
1 612585 416905 407181 40ee05 41be8b
2 61dd87 414088 41f988 41de09 407a81
3 61dd0d 406c81 407102 416a05 416685
4 608d02 41f489 41f10c 407182 405201
5 612505 416885 407101 40ed85 413207
6 60e903 41f00f 416906 41f98b 410a05
7 61dd07 414008 41f908 41dd89 407a01
8 611888 41e80c 41e890 41d188 40e203
9 61788b 40f405 40f487 411984 41da08
a 61dc8d
see step 9*
407082 416985 416605
b 61e88c
see step 9*
407c82 40c105 41898c
c 608c82
see step 9*
41f08c 407102 405181
d 612485
see step 9*
407081 40ed05 413187
e 61dc87
see step 9*
41f888 41dd09 41d589
f 61dc0d
see step 9*
407002 416905 416585
There is a 3-byte code for each frequency. The code for the sensor
clock is set to sb1…3 of a returned camera profile (command :w).
The code of the pixel frequency corresponds to sa1…3.
Example:
return of frequency codes
63