Mikrotron MC130x, User Manual, Page: 22 / 68

Configuration MC130x Users Manual Rev. 2.1
6.2.1 Read camera profile
The response to the read camera profile command :w is a hex string
of the contents of all camera registers.
Command:
:w
Response(e.g.): 6d774ac800006a1c61e88c40a1840000000003ff
000000800330000000000000000000000000000000000000
all values hex, e.g.: 70
HEX
= 112
DEC
Sequence of transmitted data bytes:
A1 A2 A3 A4 A5 A6 A7 A8 Sa1 Sa2 Sa3 Sb1 Sb2 Sb3 R1h R1l ...
R15h R15l
↵
A1...A8 image level control (brightness, contrast…)
Sa1 Sa2 Sa3 3 Byte synthesizer code of pixel clock
Sb1 Sb2 Sb3 3 synthesizer code of sensor clock
(see chapter 6.5 )
R1…R15 image control (image position, size, sync….)
R1h ... high Byte R1
R1l ... low Byte R1
↵
... CR+LF (0dh + 0ah)
6.2.2 Write user profile
The camera profile is transferred to one of the four user profiles.
Command:
:p <n> <n> = 0 ... 3,c
L
Issue this command only, if the camera profile was
successfully tested.
22