Configuration MC130x
Users Manual Rev. 2.1
6.2.3 Load user profile
Load one of four user profiles to the camera profile.
Command:
:g
<n>
<n>
= 0 ... 3, c
6.2.4 Load factory profile
The factory profile can be read but not changed by the user. (see
also chapter
).
Command:
:f
6.3 Adjusting
image
There are eight D/A converter to influence image quality: bright-
ness, contrast, black up and black down. brightness, contrast and
especially black up/down might be adjusted if image size and/or
sensor clock changes. All eight parameters are stored in non-
volatile memory within one of the six profiles.
6.3.1 Brightness
This level might be changed if image size changes.
Command:
:a1
<x
1
x
0
>
<x
1
x
0
>
: Range,
typ. 55h ... 80h
Response:
none
23