Mikrotron MC130x, User Manual, Page: 12 / 68

Hardware MC130x Users Manual Rev. 2.1
3 Hardware
3.1 Serial interface
The communication via the serial interface is optional. The camera
was programmed with predefined profiles and is fully operative.
For loading new parameters or settings into the camera a serial data
link is needed.
A description of the connector pinning is in chapter
9.2 .
3.1.1 MC1300
A connection is accessible via a standard 9-pin or the 44-pin data
connector.
Parameters of the RS-232 link:
table 2
Baud rate 9600 Bd
Data bits 8
Parity n
Stop bits 1
See chapter
9.2 for pinning and wiring of the RS-232 cable.
3.1.2 MC1301
The serial interface is integrated in the Camera Link connection,
which is supported by many frame grabbers. The settings for the
communication are shown in table 3.
12