MikroKopter OktoXL, Instruction Manual

Page: 9 / 74

Before each flight
Check the Kopter always for:
•
Damage to the frame, cables, motors, propellers and electronics
•
Tightness of the rigger, motors and propellers
•
Functions of the motors
•
Tightness of all screws (Motors, Rigger etc.)
•
Loaded and not damaged batteries ( ARF-MikroKopter and transmitter)
•
That the microSD card is insert into the NaviCtrl. (see page 62).
◦
The SD card will safe the LOG file during flight. This can help if you have a problem with the copter.
In the Settings the function „ no start without SD card “ is activated.
So if the SD-Card is not there or not plugged in correctly into the NaviCtrl, you can not start the Copter.
In this case the Copter will beep during you try to start the Copter.
(See also „Maintenance“ Pg. 56)
The order of switching on / off the ARF-MikroKopter and the transmitter:
Switch on (before the flight):
1. All switches on the transmitter put into the default „OFF“.
2. Switch on the RC-Control (if necessary choose the right model memory).
3. Bring the trim of the control-sticks into the middle position.
4. Connect the ARF-MikroKopter to the battery (LiPo).
Switch off (after the flight):
1. Switch off the motors.
2. Disconnect battery (LiPo) from the ARF-MikroKopter .
3. Switch off the transmitter.
HiSystems GmbH Page 5
info
info