MikroKopter OktoXL, Instruction Manual

Page: 66 / 74

License
The ARF MikroKopter is already equipped with the required license for commercial use.
A Micro SD-Card is already inserted into the NaviCtrl and contains your personal license file and the license number.
With the license additional functions are usable with the copter:
•
Greater range of 500mtr. For the WayPoint flight / FollowMe-Flight
•
Greater FailSafe-time (max. 247 Seconds)
•
Transfer of up to 100 WayPoints to the NaviCtrl
•
Adjustable maximum height (depending on the Rise permit different)
•
Adjustable maximum flight range (depending on the Rise permit different)
•
Adjustable "Fail sink-radius" (depending on the Rise permission differently - for example, in France required)
To use these functions the Micro SD-card with the license file need to be inserted into the NaviCtrl. The license is
automatically copied to the NaviCtrl and safed (since software version V2.06).
The Micro SD-card stay into the NaviCtrl to record the telemetry data in a LOG file.
To read the data on the Micro SD-card you need the MikroKopter-Tool. With the Button “SD-Card” you can red the
information's on the card. In the folder “LOG” you will find the telemetry data of each flight. This can help in case of a
problem with the copter.
The file “
license.ini ” is the license file for the licensees. Do NOT clear or change this file.
Depending on the flight permit additional requirements such as a maximum altitude or a limited flight range may be
necessary. In order that those “limits” cannot be flown it can be fixed on the SD card. In that way the copter will stay in
the limits.
Example:
We will use a
max Altitude of 150m and a max Range up to 300m around the place where we start the Copter. If the
Copter will fly over this max. Range (because strong Wind, fault etc.) the copter should land automatically if he reach
the second “
Fail Sink-Radius” .This should be at 350m.
For this we change in the settings this values:
> Setting > „Altitude“:
Max. Altitude => 150
> Setting > „NaviCtrl 2“: Max. Flying Range => 300
> Setting > „NaviCtrl 2“: Descend range => 350
Page 62 HiSystems GmbH