MikroKopter OktoXL, Instruction Manual

Page: 68 / 74

Troubleshooting
Problem: Source:
You can not start the Motors
•
Compass is not calibrated. (Page 35)
•
Gyros are not calibrated. (Page 35)
•
The motor safety switch hasn't been pressed at
the same time with „Gas-Stick“ down + „Yaw-
Stick“ to the right.
•
Battery is not connected.
•
Transmitter is not switched ON.
•
Wrong model memory on the transmitter has
been chosen.
You can start the Motors, but you can not give
throttle.
•
Height sensor not switched OFF during start.
•
In the settings was clicked „ Avoid Start without
GPS Fix " and there is no Satfix.
•
Battery is not charged.
The Copter is beeping every second
•
There is no Satfix and the GPS-Mode switches on
the transmitter are on „PositionHold“ or
„ComingHome“.
The Copter is beeping fast
•
The battery is empty and need to be charged.
•
The transmitter has been switched OFF.
The Transmitter is beeping
•
The copter is not connected with the battery.
•
The battery from the transmitter need to be
charged.
The Copter fly's very “sluggy”
•
Carrying a large payload on the copter.
The Copter fly's in circles or doesn't hold the position
perfect with activated function “PositionHold”
•
Reflections from buildings / trees disrupt the
GPS.
Solution = Flying higher.
•
You fly several hundred miles away from
their home position. Solution = recalibrate
compass.
•
During a solar storms, the GPS reception is
bad. Deactivate all GPS functions and fly
manually fly.
Page 64 HiSystems GmbH