www.dronetech.co.nz 09 836 6088
Follow us
@nzdronetech
@dronetechnz
SPLASH DRONE 3+
Controller Power ON First – Then Drone Second – ALWAYS
Drone Power OFF First – Then Controller Second – ALWAYS
1. ACCELEROMETER CALIBRATION – All Switches UP!
Power on Controller, Then Drone (Hear Beep Tone)
GREEN /
R
Red
D
/YELLOW lights should be fast flashing for about 10seconds.
Then change to fast flashing GREEN / Red
Turn “Return Home” Switch down
*
Left Stick to Lower Right, Right Stick to Upper Right (AND HOLD)
Drone in calibration mode
Should go fast flashing GREEN / Yellow / Red, Then slow flashing GREEN
Release sticks
First Calibration complete
Power off Drone, then Controller.
2. COMPASS CALIBRATION.
Ensure all SWITCHES UP
Power on Controller, Then Drone (Hear Beep Tone)
Turn “Return Home” Switch down
Left Stick to Lower Left, Right Stick to upper Left
Should be RED, GREEN and YELLOW flash rapidly
