1
Cold water inlet hose
- blue stripes -
(see “Plumbing”)
2
Hot water inlet hose
- red stripes -
(see “Plumbing”)
3
Electrical connection
(see “Electrical connnection U.K.”)
4
Coin mechanism (optional)
5
Small panel with text **
6
Drain hose for drain pump
(LP) version (see "Plumbing")
7
Drain hose for drain valve
(AV) version (see “Plumbing”)
8
Concrete plinth (to be supplied on
site), if not available a steel plinth*
can be purchased from Miele, (en-
sure there is secure connection to
the floor).
9
Hexagonal M 10 nut
10
Butt strap
11
Screw, washer and plug 8 x 40
When installing on a suspended
floor, use the appropriate fixing kit
(plugs and screws).
Coin mechanism / Time counter
This machine can be equipped with a
coin / token box.*
The machine can also be connected to
an already existing time counter. A spe-
cial connection cable * is required for
this.
The re-programming of the machine
then required must only be carried out
by an authorised Miele Service Dealer
or the Miele Service Dept.
The machine must not be used in
conjunction with equipment de-
signed to automatically switch the
machine off (e.g. Timer switches).
All items marked * are available to
order from your Miele Dealer or from
the Miele Professional Sales Dept.
** A small panel is provided with the
machine to explain the symbols on the
control panel. This is to be inserted at
the left hand side of the control panel.
Set the small panel into the lower
guide, press downwards and at the
same time slot it in at the top.
Installation
45
