F
Sluice or separate rinse
(depending on model)
Separate rinse
This is suitable for rinsing textiles which
have been hand washed and only re-
quire rinsing. It can also be used when
an additional rinse might be needed
after a programme has run.
Sluice programme
The sluice programme is only available
on drain valve versions of the machine.
It is suitable for heavily soiled cotton
and linen items.
For good results it is advisable to wash
smaller loads, e.g. 4 kg in this pro-
gramme.
Add detergent to the pre-wash and
main wash compartments and add
fabric conditioner to compartment
p
.
Select
F
The Sluice programme begins, consist-
ing of:
Cold water sluice cycles
(high water levels, then drained)
Pre-wash up to 65ºC
Main wash at above 71ºC, held for
10 minutes
Rinses
Drain
Spin
Once the programme commences the
door cannot be opened until comple-
tion of the whole programme, in full
compliance with DHSS requirements.
For the same reason options for chan-
ge available with other programmes
during a cycle are excluded.
Additional programmable
functions
It is possible to have additional pro-
grammable functions and / or pro-
gramme sequence changes carried
out by a Miele Service Dealer or Ser-
vice Engineer.
Any changes to the standard machine
version must be noted on a card left
with the machine as a record for any
subsequent servicing work.
Programmes
25
