Troubleshooting
The following is a list of problems you may encounter when using this appliance and some suggestions that may help to
correct the problem. If you still have problems, please contact your Fisher & Paykel trained and supported service
technician.
Solving Operating Problems
Problem
Possible Causes
What To Do
Washer not
turning on
Power not switched on at the
wall.
Switch the power on at the wall. Then press ‘POWER’.
Household power supply not
working.
Try plugging in another electrical appliance.
Keylock may be activated.
Touch and hold the ‘Keylock’ button for 2 seconds (refer to
'Wash Cycle Options'
).
Touching
does not start
the fill
Washer door not closed properly.
Open and reclose door.
The washer is waiting for a
command from you.
If
is flashing then the washer is waiting for a command from
you.
The washer has detected a fault.
Check if a code is being displayed on the panel (refer
to
'Before you Call for Service'
and
'Fault Codes'
).
Hot and cold taps not turned on.
Check that both hot and cold taps are turned on (if using cold
inlet only ensure inlet valve cap is installed on the hot valve on
the machine).
Hot and cold taps not connected
Check the cold tap is connected to the cold valve on the
Updated: Thu, 11 Nov 2021 20:34:28 GMT
Powered by
1